Container Sizes: 1 Gal, 5 Gal, 55 Gal
• Semi-transparent penetrating concrete stain
• The preferred acid stain alternative. Provides the variegated look of acid stain, with more control, flexibility and ease of use
• Made of bio-based natural plant oils, modified acrylics and 100% solids soy ester pigments
• Non-hazardous, low VOC <25 g/l, virtually odorless
• Will not chip, flake or peel
• Does not alter surface friction
• Mildew and efflorescence resistant
• Easy stenciling and scoring
• Earn LEED points
• Drastic reduction in install time, Easily repairable
• Water, UV, stain and hot tire pickup resistant
• Use for decorative concrete floors, masonry walls, natural stone, landscapes, hardscapes, pool decks, patios, garage floors, tilt-up walls, plaster walls, adobe, rammed earth, stucco drywall, concrete art, etc.
• Requires a sealer. Speciality finish coats may be applied on top of the sealer, such as EcoTuff, high gloss polyurethance, PolyUrea, floor wax, etc. if desired.
Basic Design Tips:
Lighten Color Tones- Simply dampen your applicator with water and go over areas that you wish to lighten. Either blot or wipe to remove topical stain and achieve desired appearance. This process must be done generally within 1 hour of installation for easier modification.
Darken Color Tones- Apply an additional coat after a 1 hour intercoat time. Use faux finishing sponge or pad to add accent patterns or simply re-apply for complete coverage.
Borders & Stencils- Tape off your design pattern or apply a decorative stencil to the desired surface area. If placing a pattern over the first base coat, be sure the stain is dry to the touch.
Stone Tile Effects- Simply mask off grout line patterns. Apply the stain color(s) to create your simulated stone tile look. Remove grout line tape when dry.
Mixing Colors- Our stain colors may be mixed for additional color variations. Simply mix your desired colors, and then apply as usual.
